AQUNA Premium: Whole House Filtration System With Osmosis Drinking Water Filter and UMH Water Activation

3.690,00 5.393,00 

Available from end of August! Exclusive high-performance filtration system for osmosis drinking water in the whole house plus UMH water activation for the whole house

  • 53 l/min filtered water plus osmosis drinking water with UMH water activation (Master)
  • 3 x 20 inch filter (BIG) with 3 x pressure gauge: 2-stage sediment filter, 1 activated carbon block
  • Innovative osmosis module: 1.2 to 2.3 l/min electroless
  • Without pump, tank and electrical parts

Whole House Water Filtration: 3 x 20 inch BIG filter casings: 1st stage sediment filter 20μm, 2nd stage sediment filter 5μm, 3rd stage activated carbon block 10μm, UMH-Master water energisation
Drinking water purification: 2 x 350 GDP RO membranes, 1.2 to 2.3l/min currentless; remineralisation and UMH water activation for hexagonal water structures. Optional: junction set for dishwasher in the shop
Osmosis module application range: 2.76 to 5.52 bar on cold water line. Without pump, tank and electrical parts

This innovative total solution ensures optimum protection of the entire house water pipes and the associated systems such as washing machine, dishwasher, instantaneous water heater including UMH water activation throughout the house. The result: pure, filtered and activated water at every water tap in the bathroom, shower, bathtub and kitchen! The osmosis module in the kitchen provides 1.2 to 2.3 l/min of purest drinking water (depending on the line pressure and water temperature) with subsequent remineralisation and UMH water activation without any disturbing pumping noise. Several osmosis modules can be connected in parallel – for more litres per minute!
Filter change house filtration system: 3 to 6 months, depending on water consumption and local water quality
Change interval osmosis module (2 x 350 GDP membranes): 2 to 4 years, depending on water flow and local water quality
For water hardness above 14dH, a desalination system should be used to replace calcium and magnesium ions with sodium ions using the ion exchanger process. Result: less limescale deposits in the entire pipe system and in connected appliances.

Minimum/maximum operating conditions 20 inch pre-filter SED/CTO:
Inlet pressure: 2.5 to 6 bar
Inlet temperature: 4.0° C to 40.0° C

Minimum/maximum operating conditions Osmosis module (RO module):
Inlet pressure: 2.76 bar (40 psi) to 5.52 bar (80 psi)
Input temperature 40° F (4.44° C) to 100° F (37.78° C)
Input TDS 50 mg/L to 2,000 mg/L
Input hardness: 0 mg/L - (0 grain) to 171 mg/L - (10 grain)
Input chlorine: 0 mg/L to 1.0 mg/L
Input iron: 0 mg/L to 0.1 mg/L
Input manganese: 0 mg/L to 0.05 mg/L

An additional metal-free 1-way or 3-way faucet (if not already in place) is required to use this system. Use this 50% voucher code to get a 50% discount on selected 1-way and 3-way faucets in the shopping cart/checkout area.

Additional information

Weight N/A
House water pipe connection size

¾ inch, 1 inch, 1 ½ inch

Sink connection

⅜ inch, ½ inch

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.