AQUNA Standard: Whole House Water Filtration & Osmosis Drinking Water Filter with UMH Water Activation
Available from end of August! Central water filtration system for the water in the entire house, plus UMH water activation for osmosis drinking water
High-performance water filtration system for an entire house:
- 3 x 20 inch BIG filter (53 l/min)
- innovative osmosis module
- without pump, tank and electrical parts
- with UMH activation/energisation of the drinking water
Whole House Water Filtration: 3 x 20 inch BIG filter housings: 1st stage sediment filter 20μm, 2nd stage sediment filter 5μm, 3rd stage activated carbon block 10μm
Drinking water purification: 2 x 350 GDP RO membranes 1.2 to 2.3 l/min currentless, remineralisation and UMH water activation for hexagonal water structures. Optional: junction set for dishwasher in the shop
Osmosis module application range: 2.76 to 5.52 bar on cold water line. Without pump, tank and electrical parts
This innovative total solution ensures optimum protection of the entire domestic water pipes and the associated systems such as washing machine, dishwasher, instantaneous water heater. Pure and filtered water at every water tap in the bathroom, shower, bathtub and kitchen! The osmosis module in the kitchen provides 1.2 to 2.3 l/min of purest drinking water (depending on line pressure and water temperature) with subsequent remineralisation and UMH water activation without any disturbing pumping noise. Several osmosis modules can be connected in parallel – for more litres per minute!
Filter change house filtration system: 3 to 6 months, depending on water consumption and local water quality
Change interval osmosis module (2 x 350 GDP membranes): 2 to 4 years, depending on water flow and local water quality
For water hardness above 14dH, a desalination system should be used to replace calcium and magnesium ions with sodium ions using the ion exchanger process. Result: less limescale deposits in the entire pipe system and in connected appliances.
Minimum/maximum operating conditions 20 inch pre-filter SED/CTO:
Inlet pressure: 2.5 to 6 bar
Inlet temperature: 4.0° C to 40.0° C
Minimum/maximum operating conditions Osmosis module (RO module):
Inlet pressure: 2.76 bar (40 psi) to 5.52 bar (80 psi)
Input temperature 40° F (4.44° C) to 100° F (37.78° C)
Input TDS 50 mg/L to 2,000 mg/L
Input hardness: 0 mg/L - (0 grain) to 171 mg/L - (10 grain)
Input chlorine: 0 mg/L to 1.0 mg/L
Input iron: 0 mg/L to 0.1 mg/L
Input manganese: 0 mg/L to 0.05 mg/L
An additional metal-free 1-way or 3-way faucet (if not already in place) is required to use this system. Use this 50% voucher code to get a 50% discount on selected 1-way and 3-way faucets in the shopping cart/checkout area.
|House water pipe connection size||
¾ inch, 1 inch, 1 ½ inch
⅜ inch, ½ inch
Only logged in customers who have purchased this product may leave a review.